Here are the things :
- Step 1
Sweep and clean the floor where you plan to place the tree. Debris trapped under the tree can grind into the floor and cause damage.
- Step 2
Fold an old sheet into a size slightly larger than the tree stand or purchase a tree stand mat. Arrange the sheet on the spot where you will place the tree. Cut or fold a plastic tablecloth to fit the size of the folded sheet, and place onto the sheet. Place the tree stand on top of the sheet and plastic.
- Step 3
Cut any netting or twine from the Christmas tree.Step 4Shake your Christmas tree gently before bringing it into the house and comb your fingers through the branches to dislodge any loose needles.
- Step 5
Insert the base of the tree into the extra large trash bag and pull the sides of the bag up as far over the branches as it will go.
- Step 6
Carry the tree into the house with one person supporting the trunk end and the other supporting the top of the tree.
- Step 7
Cut the plastic bag off the tree with scissors and set the trunk of the tree into the stand. Tighten the braces, if any.
- Step 8
Pull the folded sheet under the tree stand while another person holds the tree steady to adjust the position of the tree without scratching the floor.
- Step 9
Fill the tree stand base with water with a plastic pitcher or watering can.Step 10
Cover the sheet and plastic with a decorative tree skirt, sheet or tablecloth.Step 11Sweep or vacuum the area around the tree thoroughly, removing fallen pine needles and other debris that can damage floors. Continue to sweep or vacuum daily while the tree is in your home.
- Step 12
Remove the tree by pulling the folded sheet and dragging the entire tree and stand to the doorway before lifting the tree from the stand. Siphon the water from the tree stand base first if desired.
No comments:
Post a Comment